- Details
- More images
- Recommendation
Products description
2 x Bead blast cylinder, rebore, hone, 4 VA-pushrod tubes
In order to bead blast the cylinder the galvanised push rod tubes must be removed (otherwise the last bit of remaining zinc coating would be removed along with the rust).
Please send us your cylinder heads well packed. Please do not forget your address, telephone number and e-mail address!
Recommended products:
High quality over-size piston in 94.46 mm for all R100 models up to September 1980 produced with recent technical expertise.
MADE IN GERMANY!!!
Modern and lighter pistons for R60/5, R60/6 and R60/7 - 1. oversize in 74,0 mm
Modern and lighter pistons for R60/5, R60/6 and R60/7 - 2. oversize in 74,5 mm
Modern and lighter pistons for R60/5, R60/6, R60/7 - 3. oversize in 75,0 mm
Modern and lighter pistons for R75/5, R75/6 and R75/7 - 1. oversize 82,5 mm
Modern and lighter pistons for R75/5, R75/6 and R75/7 - 3. oversize 83,0 mm
3. oversize in 91,5 mm
1. oversize in 90,5 mm
You need 2 pc for one engine.
(in conjunction with cylinder overhaul art.-no. 112100 and 112030 or cylinder kits)
This product is compatible with:
(in conjunction with cylinder overhaul art.-no. 112100 and 112030 or cylinder kits)
Modern and lighter pistons for R75/5, R75/6 and R75/7 - 3. oversize 83,0 mm
Modern and lighter pistons for R75/5, R75/6 and R75/7 - 1. oversize 82,5 mm
S/S hex nut M10x1.5 SW 14 between cylinder and cylinderheads on the outside bolts.
3. oversize in 91,5 mm
1. oversize in 90,5 mm
